Convenient and Quick Automatic Multi-Effect Distilled Water Machine Distiller

• Customization: Available
• Certification: CE, GMP, ISO
• Control System: PLC
• Model NO.: MDR-1300
• Core Components: Engine
• Material: Stainless Steel
• Dimension(L*W*H): Customized
• Type: Pharmaceutical Water Treatment Equipment
• Finished Dosage Form: Liquid
• Precision: High Precision
• Voltage: 220V
• Computerized: Computerized
• Customized: Customized
• Condition: New
• Warranty: 1 Year
• After-sales Service: Answers Online Within 24 Hours
• Transport Package: Wooden Packing
• Specification: customized
• Trademark: Medigrade
• Origin: Shanghai, China
• HS Code: 8419409090
• Production Capacity: 20 Sets/Year

Product Description

Multi-effect Water Distiller

Working Principle
The qualified feed water is input into the condenser after increased the pressure by multilevel pump. And then enters into each preheater (the feed water will be heated by the secondary steam and distilled water in the condenser, in the fist stage preheater, the feed water heated by the industrial steam condensate water, after enters the other stages preheater, it is heated by the secondary steam condensate water). Next the feed water is input into the water distributor of the 1st stage evaporator, which is spouted to the inside of the heating tubes and flowed as film. The produced second steam with drips enters into the gas and steam separating setting from the bottom of the heating tubes. The separated pure steam enters into the next stage as heating steam, meanwhile, the feed water, which is not evaporated, enters into the next stage. And then it is repeated above mentioned process. The pure steam from last stage is converged with each stage condensed water (except 1st stage), after cooling and drainage of the non-condensable gas.(according to different model, there should be a device for discharge the non-condensable gas continuously) it is became the WFI. There is an on-line conductivity test at the output orifice, the qualified distilled water will be output as the WFI, and the unqualified will be discharged.

Characteristics

1. Structural form: External preheater, condenser and the first effect evaporator are all double tube plate designed.
2. Separation device: the feed water enters into the equipment will under three separation that is film, evaporation, gravity separation and sprial circumferential flow.
3. Material: The parts that contact with the feed water, WFI and secondary steam should be all adopted with SS316L.
4. Automatic welding: For the connection of the pipeline and the spare parts, use the arc to protect the automatic welding track, to ensure the welding quality.
5. Three-dimensional elbow: Making stainless steel pipe directly tensile bend in the pipeline as far as possible, avoid welding.
6. Insulation: Both the separator and preheater are adopted with glass fiber needle wire mat, which is a new type thermal insulation material. The insulation effect is 30 times of the common insulation material.
7. Surface treatment: We use to the interior and the exterior surface, to effectively guarantee the finish of the surface of the stainless steel. We can also use sandblasting process to the exterior surface.
8. Energy saving: Multi-effect water distiller has a high utilization of the industrial steam because the secondary steam is used in each effect. which has a significant energy saving effect. This energy saving is obviously with the increase of the mummer of effect evaporators, at the same time, the amount of the cooling water is substantially reduced. The five-stage effect water distiller of our company only use little cooling water, while the six-stage effect water distiller doesn't need cooling water.
9. Automatic sterilization process after start, achieve the system self-sterilization process.
10. Control system: Adopt PLC automatic control technology, can provide a variety of modes of communication, which meet the control system of 21CFR PART11, the automatic control system can meet the requirement of GAMP5.
11. Recording mode: You can choose the paperless recorder, and also paper recorder to record the key parameters in real time. 

Parameter table(Industrial steam pressure 0.3 Mpa)

 

Model	Capacity(L/h)	Industrial steam consumption(L/h)	Feed water consumption(L/h)	Cooling water consumption(L/h)	Dimensions(mm)
MDR100-4	≥100	30	110	80	1065 x 540 x 1900
MDR300-5	≥300	80	330	170	1610 x 650 x 2300
MDR500-4	≥500	150	550	550	1540 x 770 x 3150
MDR500-5	≥500	115	550	190	1900 x 770x 3150
MDR1000-5	≥1000	250	1100	350	2200 x 1000 x 3400
MDR1000-6	≥1000	210	1100	0	2830 x 1000 x 3400
MDR2000-5	≥2000	520	2200	750	3000 x 1200 x 3600
MDR2000-6	≥2000	440	2200	0	3510 x 1200 x 3600
MDR3000-6	≥3000	670	3300	0	3600 x 1200 x 3750
MDR4000-6	≥4000	900	4400	0	4080 x 1250 x 4000
MDR5000-6	≥5000	1130	5500	0	4470 x 1450 x 4250
MDR6000-6	≥6000	1350	6600	0	4470x 1450 x 4500

If you are interested in this, please contact me: Nana Zhang
Shanghai Medigrade Industry Co.,Ltd
Waigaoqiao Free Trade Zone, Shanghai,China. 200137
 
 
 
medigrade.en.made-in-china.com